Posts Tagged ‘rx-8’

Mazda to revive RX-7 in… 2017?

Published by Mazda Blogs on November 6th, 2012

Filed under: , , , ,

Mazda RX-7 in silver - front three-quarter studio view

There is a special place in our hearts reserved for the Mazda RX-7. Its screaming rotary engine made the ’80s and ’90s a time of high-revving fun. While Mazda continued the rotary with the four-door RX-8, the two are not the same car, and eventually the latter was phased out.

The Motor Report is the latest outlet to crank up the rumormill over a return to Wankel power and an RX sports car for the troubled Japanese brand. According to TMR, a rotary engine could come back – and so could the RX-7 nameplate – albeit not overnight. The return of the RX-7 is said to be set for 2017, and the source quoted is none other than Mazda sports car boss Nobuhiro Yamamoto.

Speaking with the press at a local launch of the updated MX-5 Miata, Yamamoto said the future RX-7 would have a curb weight close to that of the Toyota GT 86 (about 2,600 pounds), and have a larger emphasis on the driver’s involvement. Yamamoto was also the powertrain chief for the JDM-market FD3S generation (1992-2002 model) and was extremely proud of that engine. Yamamoto reportedly says he would prefer a naturally aspirated version of that engine over any kind of forced induction solution, claiming that the 16X rotary engine that has been developed would be capable of 220kW (295 hp) in that configuration. The 16X was developed in 2007 but has yet to find its way into a production vehicle.

2017 would mark the 50th anniversary of the introduction of the rotary engine. Frankly, it would be a shame if some form of the quirky and revvy powerplant was not found under the hood of a sports car anywhere in the market.

Mazda to revive RX-7 in… 2017? originally appeared on Autoblog on Tue, 06 Nov 2012 16:01:00 EST. Please see our terms for use of feeds.

Permalink


Mazda builds final rotary engine

Published by Mazda Blogs on June 27th, 2012

Filed under: , ,

Mazda Cosmo

Mark it down, auto enthusiasts. Mazda built its last rotary engine on Friday, June 22.

By final, we mean the line that assembled Renesis engines for Mazda’s RX-8 sports car was idled, and there are currently no plans to restart its production. Mazda has a long-running history of building Wankel powerplants, and its production of the high-revving engine has seen a few stutters since Mazda put the first dual-rotor Wankel in a production car in 1967.

Of course, it’s always possible that Mazda finds a way to solve – or at least drastically improve – the failings of the Renesis: high fuel consumption and poor emissions. We’ve been hearing about the so-called 16X rotary for years, and we’d love to see it enter production at some point in the not-terribly-distant future.

For now, though, join us in remembering some of Mazda’s past rotary-powered machinery in the image galleries above and below. Even if the world never sees another production rotary, at least it’s been a good ride.

Mazda builds final rotary engine originally appeared on Autoblog on Wed, 27 Jun 2012 16:57:00 EST. Please see our terms for use of feeds.

Permalink


Tweeter button Facebook button